Dahua 2M HD IP, User Manual, Page: 3 / 11

Safety Informa tion
This symbol indicates that dangerous voltage
consisting a risk of electric shock is present within
this unit.
T his exclamation point symbol is intended to alert the
user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Warning Precautio n
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
:
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
.
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
WARNING
Be sure to use only the standard adapter that is specified in
the speci fi ca tio n sheet. Using any other adapter could cause
fire, electrical shock, or damage to the product.
Incorrectly connec ti ng the p ow er supply or replacing ba tte ry
may cause explosion, fi re, electric shock, or damage to the
product.
Do not connect multiple cameras to a single adapter.
Exceeding the capacity may cause excessive heat gener atio n
or fire.
Securely plug the power cord into the power receptacle.
Insecure connection may cause fire.
When installing the camera, fasten it securely and firmly.
A falling camera may cause personal injury.
Do not place conduc
ti ve objects (e.g. scr ew d rivers, coins,
metal items, etc.) or container s fi lled with wat er on top of
the camera. Doing so may cause personal injury due to fire,
electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations.
Doing so may cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop
using the product. Immediately disconnect the po wer sorce
and contact the service center. Con ti nued use in such a
condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest
service center. Never disassemble or modify this product in
any way.
When cleaning, do not spray w ater directly onto parts of the
product. Doing so may cause fire or electric shock.
WARNING
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Pr ecaution
Opera ting
•
Before using, make sure po w er supply and all other parts are
properly connected.
•
While opera tin g, if any abnormal condi ti on or malfunc tio n
is observed, stop using the camera immediately and contact
your dealer.
Handling
•
Do not disassemble or tamper w ith parts inside the camera.
•
Do not drop the camera or subject it to shock or vibra ti on as
this can damage the camera.
•
Clean the clear dome cov er with extra care. Scratches and
dust can ruin the quality of the camera image.
Installa tion and St o rage
•
Do not install the camera in areas of extreme temperature,
exceeding the allo w ed range.
•
Avoid installing in humid or dusty environments.
•
Avoid installing in plac es whe re radia tion is p resent.
•
Avoid installing in places wh ere there are strong magne ti c
•
Avoid installing in places wh ere the camera w ould be subject
to strong vibra tion s.
fields and electric signals.
•
Never expose the camera to rain or w ater.