manualshive.com logo in svg

Dahua Technology VTH2421FW-P, User Manual, Page: 59 / 133

Share
Download
Dahua Technology VTH2421FW-P User Manual Download Page 59

Parameter

Description

Device Info

Channel

●

If IPC is connected, default setting is 1.

●

If NVR is connected, set channel number of IPC on NVR.

Device Name

Name of the IPC/NVR.

Stream Type

●

Main stream: High definition that needs large amount of

bandwidth. Applicable to local storage.

●

Extra stream: Relatively smooth image that needs small

amount of bandwidth. Applicable to network with

insufficient bandwidth.

Protocol

It includes local protocol and ONVIF protocol. Please select

according to the protocol of the connected device.

Encryption

Enable it if the IPC to be added is encrypted.

Network Config

IP

IP address of the IPC/NVR.

Username

The login username of the webpage of the IPC/NVR.

Password

The login password of the webpage of the IPC/NVR.

Port

554 by default.

Favorites

Add the IPC to Favorites.

Step 4

Tap 

.

Related Operations

: Add the IPC to Favorites.

3.5.2.2  Modifying IPC

Procedure

Step 1

Select Monitor  > 

.

Step 2

Tap 

 of the IPC, and then tap 

 at the right upper corner.

Step 3

Modify IPC parameters.
For details, see Table 3-4 .

Step 4

Tap 

.

3.5.2.3  Deleting IPC

Delete the IPC that has been added. However, IPC synchronized from VTO or the platform cannot

be deleted.

Procedure

Step 1

Select Monitor  > 

.

Step 2

Delete the IPC.

52

Summary of Contents for VTH2421FW-P






































































































































Reviews:

No comments