manualshive.com logo in svg

Dahua Technology VTH2421FW-P, User Manual, Page: 3 / 133

Share
Download
Dahua Technology VTH2421FW-P User Manual Download Page 3

●

The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or

visit our official website. The manual is for reference only. Slight differences might be found

between the electronic version and the paper version.

●

All designs and software are subject to change without prior written notice. Product updates

might result in some differences appearing between the actual product and the manual. Please

contact customer service for the latest program and supplementary documentation.

●

There might be errors in the print or deviations in the description of the functions, operations

and technical data. If there is any doubt or dispute, we reserve the right of final explanation.

●

Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

●

All trademarks, registered trademarks and company names in the manual are properties of their

respective owners.

●

Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

●

If there is any uncertainty or controversy, we reserve the right of final explanation.

II

Summary of Contents for VTH2421FW-P






































































































































Reviews:

No comments