Dahua Technology VDA-NVR2108W4KS2, User Manual

Page: 292 / 363

Table of Contents 280
Table 4-57
Parameter Description
Enable Enable the email function.
SMTP Server
Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value setting is
25. You can enter the value according to your actual situation.
User Name
Enter the user name and password of sender’s email account.
Password
Anonymity If enable the anonymity function, you can login as anonymity.
Mail Receiver
In the Mail Receiver list, select the number of receiver that you
want to receive the notification. The Device supports up to three
mail receivers.
Email Address Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three
senders separated by comma.
Title
Enter the email subject.
Supports Chinese, English and Arabic numerals. It supports
maximum 64 characters.
Attachment
Enable the attachment function. When there is an alarm event, the
system can attach snapshots as an attachment to the email.
Authentication
Select the encryption type: NONE , SSL , or TLS .
For SMTP server, the default encryption type is TLS .
Interval (Sec.)
This is the interval that the system sends an email for the same
type of alarm event, which means, the system does not send an
email upon any alarm event.
This setting helps to avoid the large amount of emails caused by
frequent alarm events.
The value ranges from 0 to 3600. 0 means that there is no interval.
Health Enable
Enable the health test function. The system can send a test email
to check the connection.
Interval (Min.)
This is the interval that the system sends a health test email.
The value ranges from 30 to 1440. 0 means that there is no
interval.
Test
Click Test to test the email sending function. If the configuration is
correct, the receiver’s email account will receive the email.
Before testing, click Apply to save the settings.
Step 3 Click Apply to complete the settings.
4.12.7 SNMP
This function is for some series only.
You can connect the Device with some software such as MIB Builder and MG-SOFT MIB