Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Storage Requirements
●
Stably put the device onto a support platform that is strong enough to prevent the device from
falling.
●
Do not place the device in a place exposed to sunlight or near heat sources.
●
Store the device under allowed humidity (10%–60% (RH)) and temperature (–20 °C to +60 °C, or
–4 °F to +140 °F) conditions.
Installation Requirements
●
Securely attach the device to a structure in the building or a mobile stand before you begin to
use it.
●
Do not drop or splash liquid onto the device, and make sure that there is no object filled with
liquid on the device to prevent liquid from flowing into it.
●
Select a suitable wall mount with a yellow label and let it be installed by professionals.
●
Do not install the device in a place exposed to sunlight or near heat sources.
●
Keep the device away from dampness, dust, and soot.
●
Install the device on a stable surface to prevent it from falling.
●
Install the device in a well-ventilated place, and do not block its ventilation.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●
The rated power is 1,600 W (100–180 VAC) or 2,400 W (180–240 VAC).
●
The appliance coupler is a disconnection device. Keep it at a convenient angle when using it.
●
Make sure to install a circuit breaker or similar devices in the external power circuit.
●
Place the device in a location that children cannot easily access.
●
Follow the instructions to safely and correctly install the device.
Operation Requirements
●
The contact rating of the device is about 13 mA. Before you connect the device to its power
supply, make sure the power supply is connected to an earthed power socket.
●
Be cautious when using the device to avoid injuring people, especially children.
Follow the recommendations of the manufacturer to select whether to install the device in a
cabinet, bracket or to use other mounting methods.
Do not allow people to climb the device and protect the power supply.
User's Manual
III
