User’s Manual
6
5 Installation
Prior to installation, add the button to the hub and check the signal strength of the installation
location. We recommend installing the button in a place with a signal strength of at least 2 bars.
The button supports wall mount and can be handheld. This section uses wall mount as an example.
You need to buy a bracket to install the button.
Figure 5-1 Installation
Step 1
Drill 2 holes in the wall according to the hole positions of the bracket.
Step 2
Put the expansion bolts into the holes.
Step 3
Align the screw holes on the bracket with the expansion bolts, and then secure the bracket
with screws.
Step 4
Fix the button to the bracket.
●
If the battery is dead, you need to replace the battery.
●
Before you insert the new battery, make sure to press the buttons first, or wait 30
seconds after you take out the old one.