Quick Start Guide
8
4 Smart Track Configuration
Enable smart track, and then configure the tracking parameters. And when any anomaly is detected,
the speed dome would track the target until it gets out of the surveillance range.
Prerequisites
You already configured heat map, intrusion, or tripwire on the panoramic camera.
4.1 Enabling Alarm Track
Alarm track is disabled by default; and you need to enable it manually.
Step 1
Select
Setting
>
Event
>
Smart Track
>
Alarm Track
.
Step 2
Click
On
to enable
Alarm Track
. For details, see
Web Operation Manual
.
Figure 4-1 Alarm track
4.2 Configuring calibration parameter
The camera is equipped with calibration parameter by default, and you can modify them manually
as needed.
Auto calibration mode is available on some select models.
Step 1
Select
Setting
>
Event
>
Smart Track
>
Smart Track
.
Step 2
Configure calibration parameters.
●
Auto calibration
Select
Auto
in
Calibration Mode
, and then click
Start Calibration
.
