Dahua Technology DH-IPC-HFW4X-W, Quick Start Manual

Page: 9 / 18

Quick Start Guide
3
Select the devices that need initialization, and then click Initialize .
The password setting interface is displayed. See Figure 2-2.
Password setting
Set and confirm the password of the devices, then enter a valid email address, and
then click
Next .
The final setting interface is displayed.
Password can be modified or reset in System Settings .
Select the options according to your needs, and then click OK .
The Initialization interface is displayed after initialization is completed. Click the
success icon ( ) or the failure icon ( ) for the details.
Click Finish .
The device status in the Modify IP interface (Figure 2-1) turns to Initialized .
Modifying Device IP Address
⚫
You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batches.
⚫
Modifying IP addresses in batches is available only when the corresponding devices have
the same login password.
Do Step 1 to Step 4 in "2.1 Initializing Device" to search for devices in your network
segment.
After clicking Search setting , enter the username and password, and make sure that
they are the same as what you set during initialization; otherwise there will be wrong
password notice.