Dahua Technology DH-IPC-HFW4X-W, Quick Start Manual

Page: 8 / 18

Quick Start Guide
2
2
Network Configuration
Device initialization and IP address setting can be finished with the "ConfigTool" or on web
interface.
⚫
Device initialization is required at first use or after the device being reset.
⚫
Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stay in the same network segment.
⚫
Plan useable network segment properly to connect the device to the network.
⚫
The following figures and interfaces are for reference only, and the actual product shall
prevail.
Initializing Device
Double-click "ConfigTool.exe" to open the tool.
Click .
The Modify IP interface is displayed. See Figure 2-1.
Modify IP
Click Search setting .
The Setting interface is displayed.
Enter the start IP address and end IP address of the network segment in which you
want to search devices, and then click
OK .
All the devices found in the network segment are listed.
Select one or several devices whose Status is Uninitialized , and then click Initialize .
The Device initialization interface is displayed.