Quick Start Guide
6
2.2 Modifying Device IP Address
●
You can modify IP address of one or multiple devices at one time. This section is based on
modifying IP addresses in batches.
●
Modifying IP addresses in batches is available only when the corresponding devices have the
same login password.
Step 1
Do Step1 to Step4 in "2.1 Initializing Device" to search devices in your network segment.
After clicking
Search setting
, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Step 2
Select the devices whose IP addresses need to be modified, and then click
Modify IP
.
The
Modify IP Address
interface is displayed.
Figure 2-3 Modify IP address
Step 3
Select
Static
mode, and then enter start IP, subnet mask, and gateway.
●
IP addresses of multiple devices will be set to the same if you select the
Same IP
check
box.
●
If DHCP server is available in the network, devices will automatically obtain IP
addresses from DHCP server when you select
DHCP
.
Step 4
Click
OK
.
2.3 Logging in to Web Interface
Step 1
Open IE browser, enter the IP address of the device in the address bar, and then press Enter
key.
If the setup wizard is displayed, finish the settings as instructed.
