User’s Manual
6
3.2 Cable Connection
3.2.1 Connecting the cables
For details on lightning and surge protection, see "Appendix 2 Lightning and Surge Protection".
Figure 3-2 Cable connection
Table 3-2 Component description
No.
Component
1
Illuminator
2
Air circuit breaker
3
Lightning protector
4 (Optional)
Check if the adapter is needed:
●
If the power input is main electricity, connect the adapter directly.
●
If the power input is not main electricity, connect the corresponding
adapter.
5
RS–485 cable
3.2.2 Waterproof
Make sure to waterproof all the connectors to enhance the reliability of the Illuminator.
You need to waterproof the connector even if there is no RS–485 cable connection.
●
Upright installation.
Make sure to install the Illuminator upright and place the connection part downward.