![background image](http://html1.mh-extra.com/html/dahua-technology/d-pfm522p-d1-ir/d-pfm522p-d1-ir_user-manual_500746013.webp)
User’s Manual
7
Figure 3-3 Upright installation
●
Drilling a hole under the waterproof pipe.
Put the cables in the waterproof pipe, and drill a hole under the pipe to prevent water from
accumulating.
Figure 3-4 Drill hole under the pipe
3.3 Commissioning
After connecting the power supply, if the RS–485 signal is not connected or the signal is not sent, the
Illuminator enters the photosensitive mode by default and starts the environmental monitoring
mode, and then the Illuminator will turn on or off according to the outdoor environment in one
minute. If the RS–485 signal is connected and the signal is sent, the Illuminator answers to the
corresponding signals.