User’s Manual
59
Some models support dual network port. Do not set them in the same network segment;
otherwise it might cause network error.
Step 1 Select
Setting > Network > TCP/IP
.
Figure 4-61 TCP/IP
Step 2 Configure parameters.
Table 4-30 TCP/IP parameter description
Parameter
Description
Host Name
Enter a name (Maximum 15 characters) for the host device.
Ethernet Card
Select the Ethernet card. The default setting is
Wire
.
Mode
Network mode, including static, and DHCP.
Static: Manually set IP, subnet mask, and gateway.
DHCP: Automatically acquire IP. At this moment, IP, subnet mask,
and gateway cannot be set.
MAC Address
MAC address of the host.
IP Version
Includes
IPv4
, and
IPv6
. The IP address of both versions can be
accessed.
IP Address
Device IP Address.
Subnet Mask
The corresponding subnet mask of device IP address.
Default Gateway
Corresponding gateway of device IP address.
Preferred DNS
IP address of DNS server.
Alternate DNS
Alternative IP address of DNS server.
