User’s Manual
45
Figure 4-47 DHRS parameters
Table 4-19 DHRS parameters description
Parameter
Description
Data Bit
8 by default, and cannot change.
Stop Bit
1 by default, and cannot change.
Baud Rate
The transmission speed of the code element. Options are 4800, 9600,
19200, 38400, 115200.
Check
None by default, and cannot change.
2) RS-485 transparent transmission.
The third party platform can control the RS-485 output of the Camera through
RS-485 transparent transmission, and then you can connect external devices.
Trigger capture through transmitting capture command. To test the RS-485
transparent transmission sending, and receiving conditions, select
Hexadecimal
Sending
, and then click
Open
at the right side of
Receiving Area
.
Figure 4-48 RS-485 Transparent transmission
3) Serial port push.
You can configure the serial port push information. The camera pushes the
snapshots to the third serial collection device through RS-485.
