9
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
Select the
Link Sign Out
tab, this option sets when the alarm output will trigger and also the time the alarm output triggers for.
Select the
Enable
tickbox to enable the alarm output
There are three operating modes:
Traffic Trust List
Trigger the alarm output based on white list
All Snap Car
Trigger the alarm output for all vehicles
Order
Trigger the alarm output using computer software (This feature is currently unavailable)
When testing the alarm output the
Hand On
button can be used. Selecting this button will trigger the alarm output so control of external
devices can be tested.
IR LED ADJUSTMENT
The built-in IR LEDs of the camera can be configured to adjust the intensity of the IR Light.
Go to
Setup > ITC > Extra Device > Light(485) Config
Work Mode
Used to set the IR working mode manually or automatic, the recommended setting is
Auto
Light Brightness
The intensity of the IR lights
Light Arr Mask
Select which array of LEDs are used. There are six LEDs grouped in pairs, each tickbox represents
and array. The default setting is all arrays selected.
Auto Mode
Set whether the IRs should turn on/off based on LUX level or by a timed schedule.
Prevalue
The level the LEDs should turn on/off at based on LUX. (Only applicable when Auto Mode is set
to Brightness).
Select
Save
to store the settings.
