16
3.
Install the plug-ins according to the system prompt. Once the controls are installed IE displays
the Web Interface main page.
Figure 5-4
4. Modify the administrator password as soon as possible after you successfully logged in.
5.5 Configuring Alarms
The device’s Web Interface offers a Relay Activation page to configure alarms and to set alarm
responses.
Figure 5-5
1.
Access the Web Interface for the device and click the Setup tab. Then, expand the Event menu,
then choose the Alarm page. Set the alarm input and output parameters in the Relay Activation
page.
2.
Set the parameters for the alarm inputs. Check the Enable box to activate the chosen alarm
input (Alarm 1 or Alarm 2). Set the sensor type for the alarm, either Normally Open (NO) or
Normally Closed (NC).
3.
Check the Relay Out box to enable the alarm activation function.
