13
5. Click the Net icon at the top of the ConfigTool.
6. Modify the IP Address and any other applicable network parameter.
7. Click Save to finish modification and store the modified network parameters.
Figure 5-2
5.4 Accessing the Web Interface
Each camera can be accessed directly from the Internet Explorer Web browser. The Web Interface
allows you to set camera parameter, configure alarm inputs and outputs, view live camera images,
and review recorded video.
Note:
Different devices may have different Web interfaces, the figures below are for reference only,
and may not represent the Web Interface for your camera. Refer to the Web Operation Manual,
included on the CD shipped with the camera, for more details.
2. Launch Internet Explorer and type the modified camera IP address in the address bar.
Internet Explorer opens the Login page.
8.
Type the Username and Password for the camera. (The default Username and Password is
“admin
”). Then, click Login.
Figure 5-3
9. Install the controls according to the system prompt. Once the controls are installed IE displays
the Web Interface main page.
10. Modify the administrator password as soon as possible after you successfully logged in.
