Battery Case Operation
(2) Derailleur adjustment:
Adjust the "H" and" L" corresponding screws of the derailleur. The specific
operation is as follows (loosen "H" screw when the chain can’t reach the
smallest gear. When the smallest gear drops, tighten" H" screw.
Loosen "L" screw when the chain can’t reach the largest gear. When the
largest gear drops, tight" L" screw): adjust the screw according to the
specific conditions, then rotate the gears and adjust the speed until the
chain and freewheel cooperate smoothly, without noise.
WARNING: Make sure no oil or lubricant touches the
surface of the brake pads, discs or wheel
rims.
Micrometric
Regulating
Screws
Micrometric
Regulating
Screws
Seatpost battery:
(1) Disconnect the power cord under the seatpost battery (unscrew
the connector nut under the controller box, and pull out the
connector of the power cord).
(2) Disassemble the seatpost clamp, and gently pull out the whole
seatpost set.
(3) While assembling, open the seatpost clamp, insert the seat battery
into the appropriate position, and lock the seat clamp.
(4) Then insert the power cord below into the connector of the controller
(please align the groove on the joint), and then tighten the nut.
10
Attention: make sure the power is off before taking the
battery out.
Summary of Contents for UNIO E20
Page 1: ...www dahon com UNIO E20 ...