General Operation
When you first turn on the unit, make sure
•
there is no pressure on the pedals. Pres
-
sure or movement of the pedals affects the
torque setting and can cause the unit to
function incorrectly.
The Boost operates according to the force
•
applied to the pedals. If there is no force on
the pedals for five minutes after the ON but
-
ton has been pressed, the unit will turn off
to save battery charge.
Do not ride through deep puddles or heavy
•
rain. If the assist unit is exposed to lots of
water or submerged, electric shock may
occur.
Always park the bicycle on a level surface.
•
Never lift the bicycle by the battery.
•
Using the Hub Gears
Your Boost is fitted with a 3-speed internal
geared rear hub. For general use and use
of the bicycle without the Assist unit active,
operation of these gears can be found in the
standard Dahon Owners Manual.
nOTe: Your Boost determines your overall
speed based on how fast you are pedaling.
All cut-off and assist level speeds are based
on using the bicycle in the third (high) gear at
the hub. Assistance cut-off speeds are greatly
reduced when in the first and second gears.
This is normal and allows usability for a variety
of riding styles and levels.
riding without Assistance
The Boost has been designed as a lightweight
folding bike. With the assist unit turned off it
can be ridden as a normal bicycle.
Checks before riding
Here are some things to check before you
•
start riding:
Make sure the battery is installed correctly.
•
Make sure to remove the battery lock key.
•
Make sure the battery has sufficient charge.
•
Perform all checks in the bicycle owners’
•
manual.
17
Summary of Contents for BOOST
Page 1: ...Dahon Boost OWNER S MANUAL ...
Page 25: ...Notes 25 ...
Page 26: ...Notes 26 ...
Page 27: ...Notes 27 ...