© 2009 DAHON, BPSA • 2009.09.DS.EN
Step 1 - Loosen the Lock Nut: Use
a 10 mm wrench. Turn the wrench
as indicated by the arrow.
Step 2 - Close the hinge, but do
not close the latch.
Step 3 - To loosen the hinge
clamp, use a 6 mm Allen Key.
Turn the adjustment nut counter-
clockwise as indicated by the
arrow.
Step 3 - To tighten the hinge
clamp, use a 6 mm Allen Key. Turn
the adjustment nut clockwise as
indicated by the arrow.
Step 4 - Tighten the Lock Nut:
After adjusting the hinge, use a
10 mm wrench to tighten the lock
nut again. Turn the wrench as
indicated by the arrow.
NOTE:
Hold the adjustment nut
tight with an Allen key, while
tightening the lock nut.
Adjust the hinge bolt so that the hinge opens and closes with the
correct amount of force which is 39~88 N.
NOTE:
Adjust in 1/16-turn increments only, otherwise you will quickly
over-tighten or over-loosen the V-Clamp hinge.
WARNING: If the hinge is over tightened the tension can
cause damage to the frame.
*
TOOLS NEEDED:
10 mm wrench, 6 mm Allen key
VERSION C*
Check the tightness of the clamp
by opening and closing the hinge
latch.
21
Summary of Contents for - 2010
Page 1: ...SERVICE INSTRUCTIONS ...
