© 2009 DAHON, BPSA • 2009.09.DS.EN
Andros Stem Adjustment
(continued)
Step 4 - While establishing the
desired position, make sure that
the handlebar is readjusted to
the right position. The angle of
the handlebar should allow your
fingers to easily reach the brake
levers.
You can adjust the height and
position of the Andros stem to
achieve your preferred riding
position. Move the Andros stem
within the “window of adjustment”.
Some suggested riding positions:
Step 5 – After the handlebar
has been placed in the desired
position, close the lock lever until
the safety lock closes with an
audible “click”.
NOTE: Make sure that the angle of the handlebar allows easy
access to the brake levers.
NOTE: Make sure that the safety lock is closed when you cycle.
NOTE: Regularly apply grease to the joints to avoid rust.
WARNING: Make sure that the tightening screws are tightened to a
torque of 7.5 Nm before you start cycling.
Flat For folding
High
City driving position
Lower
Treking driving
position
Low
Road driving
position
14
Summary of Contents for - 2010
Page 1: ...SERVICE INSTRUCTIONS ...
