7
Installation of the automatic oiling system
NOTE:
TO AVOID DAMAGES TO THE AUTOMATIC OILING SYSTEM ONLY USE THE SHREDDER WITH
INSTALLED EXTERNAL OIL TANK!
1. Remove screw (1) from mounting hole (2)
2. Hang external oil tank (3) to the support pins (4)
3. Secure tank with the screw (1)
4. Push oil supply tube (5) over brass hose barb (6)
5. Open hose clamp (7) with a suitable tool (pair of tongs) and position it near the the
bottom of supply tube where it covers the thickest part of the hose barb
6. Open left cap (8) and fill tank with DAHLE Shredder Oil
IF ANY OTHER PROBLEMS OCCUR. CALL YOUR AUTHORIZED DAHLE SERVICE DEALER
NOTE:
WHEN OIL LEVEL DROPS BELOW MINI-
MUM THE BAG FULL INDICATOR WILL
LIGHT PERMANENT