5
1. Remove paper from Feed Opening. The REVERSE button (7a) may be used if excess
paper remains in the Feed Opening (not on Model 20394). Clear shredding mechanism
by pressing the FORWARD button (7).
2. Separate some of the sheets and continue shredding.
20394
1. In case of a paper jam the shredder runs backwards for 0,5 sec.
2. Remove paper from feed opening. Clear shredding mechanism by pressing the
FORWARD button (7). The REVERSE button (7a) is locked until the FORWARD button
(7) has been pressed.
3. Separate some of the sheets and continue shredding.
CHANGING THE SHRED BAG
When the Shred Bag is full, the shredder will automatically shut down. On the electronic
models an LED indicator will flash and an audible alarm will sound. Changing the Shred
Bag is quick and easy if you follow these simple directions.
1. Turn shredder off
2. Open Door (11) using Door Handle (10) to expose Waste Bin (9) and Shred Bag.
3. Slide Waste Bin and full Shred Bag from shredder.
4. Dispose of full Shred Bag.
5. Install new Shred Bag in Waste Bin, draping end of Shred Bag over the lip of the
Waste Bin.
6. Slide Waste Bin, with new Shred Bag installed, back into shredder.
7. Close Door.
8. Turn on shredder and continue shredding.
NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSEDODS OF TIME