Dahle 20606 C, Operation Manual

Page: 4 / 12

4
20606 EC 20612 EC 20614 EC 20630 EC 20634 EC
1. ON/OFF is controlled by the main switch (1.1) and the green
push button (8) found on top of the shredder.
2. Pressing these buttons (main switch (1.1) first) turns
the shredder on and places it in the stand-by mode.
3. Pressing these buttons again turns the
shredder off.
SHREDDING
20606 C 20612 C
Turn shredder on. Insert paper squarely into
Feed Opening (3). Continue feeding paper into
Feed Opening until the shredding mechanism
begins to draw the paper in. At this point,
allow the paper to feed into shredder on its
own. When shredding is complete, turn
shredder off.
20606 EC 20612 EC 20614 EC 20630 EC 20634 EC
Turn shredder on. Insert paper squarely into
Feed Opening (3). A light barrier will auto-
matically activate the shredding mechanism.
Continue feeding paper into the Feed Opening
until the shredding mechanism begins to
draw the paper in. At this point, allow the paper
to feed into the shredder on its own. Once the
paper has passed completely through the shredding
mechanism, the electronic controls will automatically stop the
machine.
To shred a piece of paper too small to break the light barrier, press the FOR-
WARD button (7) once to override the auto ON/OFF function. The shredder will
continue to run until the FORWARD button is pressed again.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should shred a piece of paper after every 8 or 10 sheets of
plastic. This helps clean plastic particles out of the shredding mechanism.
REMEMBER TO LUBRICATE YOUR SHREDDER ACCORDING TO INSTRUCTIONS