Chapter 2
Embroidery Guide
16
Owner’s Manual of BECS- A15 Computerized Control System
1.
Set repetition, rotation and scaling —— press
to enter parameter
management interface.
2.
Set color-changing orde —— press
to enter color-changing
setting interface.
3.
Set patch embroidery —— press
to enter color-changing setting
interface and set patch embroidery of the pattern according to hints.
4.
For border inquiry, border idling, pattern outline —— press
to enter
frame selection and position operation.
5.
Locate pattern at frame center —— press to enter frame selection and position
operation. Please note this function is to locate pattern at the frame center set by soft
limitation.
6.
Set cyclic embroidery —— press
to enter other function operation.
Press
to enter parameter management interface. Then press “Embroidery
Assistant Parameters” and set cyclic embroidery according to hints.
IV.
Confirm Embroidery
1.
After assistant operations, press
to display a hint window, where user can
select
to confirm and turn
(cancel embrodery) to
(confirm embroidery), which indicates the machine has entered Embroidery Ready
Status.
If user selects
, the machine will stay at Embroidery Cancel Status. At this time, the
machine will not work even when user presses the start key. A hint window will display on
the screen for user to confirm the embroidery.
2.
Set Color-changing and Start Mode
User can shift between
(auto color-changing and auto start) and
(manual
color-changing and manual start).
