DAHAO 41 Series, Owner'S Manual, Page: 260 / 268

M-090 Not select update item Please select item for updating. At least select one item
M-091
Some selected update items
don’t exist. The item not existing will be cancelled after return. For updating the
rest items, please confirm again
M-092 Update successful Update is successful, please restart machine.
M-093
Format U Disk?
Press Enter to perform formatting operation. Press Esc to quit current
operation. After formatting, all pattern files will be deleted.
Update successful Update is successful, please restart machine.
M-094 Successful Current operation is successful!
M-095 Failed Current operation is failed!
M-096 Format pattern list (hotkey)?
Press Enter to perform formatting operation. Press Esc to quit current
operation
M-097
Cover the pattern with same
name in U disk?
Press Enter to cover files. Press Esc to quit current operation
M-098 Fail to correct touching panel Please perform correction again
M-099
The selected pattern is not
normal format, please
transform.
Press Enter to perform transforming operation. Press Esc to quit
current operation
M-100 Cannot transform this pattern Please confirm pattern
M-101 Restore all the settings?
Are you sure? Yes: Enter, no: X
M-102 Restore the selected item? Are you sure? Yes: Enter, no: X
M-103 Not select item Please select one or more parameters
M-104 Parameters initialization
Clear all data in . Please turn off power and restore the setting of DIP
switch.
M-105
Cannot copy and cover current
pattern
Current pattern number in copy group, system cannot cover it.
M-106 Need transform pattern format Select pattern is not a standard file format, please convert it to use
M-107
Cannot perform operation to
combined pattern Please enter pattern connection mode, press “CLR” to cancel the
combined pattern
M-108 Delete original pattern?
Delete original pattern after format transforming?
Yes: Enter
No: X
M-109
Intermediate presser in down
position
Please lift intermediate presser
M-110 Turn off machine, Bye
M-111
Large stitching pattern file
format
Not support this pattern format in this system
M-112
Wrong transformed pattern
format
Please confirm pattern
M-113
Transformed pattern data is too
long Please enter [Operation Settings]->[LCD Screen], select 'Large Sticker
Count Pattern Support' parameter set to ON
M-114
Cannot open transformed
pattern
Please confirm pattern
M-115
Wrong accuracy of transformed
pattern Set the resolution in the platemaking software to 0.1mm(Tools ->
Options Settings - BBB>