DAHAO 41 Series, Owner'S Manual, Page: 174 / 268

3
、
Restore parameters
Click the "restore mode" key to select the parameters
that are not restored on the left side of the interface, and
then press the "ok" key to perform the parameter
restore operation, and return to the previous screen after
the operation is successful.
4
、
Save user defaults
Select the "write user default value" key, press the
"ok" key , the system will prompt for the input of
permission 2 password, after the successful input will
directly perform this operation.
5
、
Clear user defaults
After successfully writing the user default value, the
"clear user default value" key is optional, and the user
default value can be cleared by pressing .
2.8.5 Default Parameter Recovery
User can restore the parameters to their default values. Additionally, user can also save the set parameters for
the usage in future.
1
、
Enter Default Parameter Recovery:
In main interface P1 (or P2), press to
activate the catalogue mode, and then press to
enter the interface for setting functions.