ENGLISH
7
PCM is initially kept in a solid state at room temperature. When
it comes into contact with the human body, which is at a higher
temperature, between 35ºC and 37ºC, it will begin to absorb all the
heat radiated by the body and use it to melt very slowly until rea-
ching a liquid state. This will allow it to use up energy during this
process rather than when heating up the product. The pad will feel
cold during this product, thus generating a pleasant feeling on hot
days This process should last a few hours. The exact time is deter-
mined by several factors such as storage temperature, temperature
of use or recovery time.
INSTRUCTIONS FOR USE
Prior to using the product, ensure that there is no apparent damage
on any of its parts. In the event that the device is damaged, discard
it immediately following the instructions contained in the PRODUCT
DISPOSAL section of this manual.
You can use this product to cool down any part of your body. When
the internal material has become completely liquid, it should be left
to stand to return to its original state and cool down again. You can
speed up the recovery process by placing the product in the fridge
and removing it after 15 minutes. However, this is not necessary if
the product is left to return to its original state by itself
The temperature must be less than 25ºC in order to return to a solid
state.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CLEANING AND CONSERVATION
The product must be stored in a clean, fresh and clean environ-
ment.
The product must be cleaned by hand using a soft cloth moistened
with mild soap. This product must never be used with abrasive
cleaners, thick brushes, solvents, benzene, thinner or alcohol or in
the washing machine.
PRODUCT DISPOSAL
Do not dispose of the product at the end of its shelf-life. Contact
your city hall or organic collection centre in order to find out the
proper procedure for disposing of this product and thus contributing
to the protection of the environment.
Request detailed information regarding the current methods for
disposal of packaging.
We hope that you will be satisfied with this product.
