ENGLISH
6
WARNING
Please read the instruc-
tions for use carefully prior
to using the product. Store
these in a safe place for
future reference.
SAFETY INSTRUCTIONS
• Do not use the product if there is any opening out of which the
internal material could escape. Never attempt to repair the product
and dispose of it following the instructions contained in the manual.
• Always keep the pad away from sources of heat that may damage
its external cover.
• Keep the product out of the reach of children.
• Never put the pad in the oven or microwave or in the freezer.
• This product must never be ironed.
• Never use water if the product catches fire to extinguish the
flames under any circumstances. CO2, sand or powder extinguishers
must be used.
• Keep the product out of the reach of pets. These may damage the
external fabric and access the material stored in its interior.
• Keep any sharp and/or pointy objects away from the product.
• If the internal material (PCM) comes into contact with your skin,
wash the area with plenty of soap and water immediately.
• If the internal material (PCM) comes into contact with your eyes,
rinse them with olive oil and continue to rinse for a few minutes. Go
to your doctor’s surgery after you have finished this treatment.
• Go to your doctor’s surgery immediately if you ingest any of the
internal product (PCM).
• Keep the product away from high voltage sources.
• This pad must never be used with gels, ointments, oils or any
other similar element.
B&B TRENDS SL. accepts no liability for any damage that may be
caused to people, animals or objects owing to the failure to observe
this warning correctly.
RELEVANT INFORMATION
First and foremost, we wish to thank you for having purchased a
Daga product. We hope you will be very happy with your purchase.
The FlexyHeat Fresh and Flexy-Heat Fresh Plus pads from Daga are
designed to generate a sensation of coolness for an extended period
of time without the requirement for any electricity sources, such as
batteries or power mains or to be cooled in any external equipment,
such as the fridge or freezer. This is possible through the use of
PCM (phase change material), a revolutionary and cutting edge
material that remains at a constant temperature of between 25 ° C
and 29 ° C
