Daewoo T011, Service Manual, Page: 11 / 19

11
Bit3-0 Set menu selected character’s color 0:BLACK 1:BLUE 2:GREEN 3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
11)ACOR
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 Transparency enable register for the menu
area not assign half transparency assign half transparency
Bit6-4 Color select for the menu area 0:BLACK 1:BLUE 2:GREEN
3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
Bit3 Transparency enable register for the
highlight menu area not assign half transparency assign half transparency
ACOR
Bit2-0 Color select for the highlight menu area 0:BLACK 1:BLUE 2:GREEN 3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
12)CALB
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 Transparency enable register for calendar
area not assign half transparency assign half transparency
Bit6-4 Background color for the calendar area 0:BLACK 1:BLUE 2:GREEN3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
Bit3 Transparency enable register for week area not assign half transparency assign half transparency
CALB
Bit2-0 Background color for the week area 0:BLACK 1:BLUE 2:GREEN3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
13)CALC
Bit Function
Status
“
0
”
Status
“
1
”
Bit7-3 No use CALB
Bit2-0 Set the character color of calendar 0:BLACK 1:BLUE 2:GREEN3:CYAN 4:RED 5: MAGENDA
6:YELLOW 7:WHITE
14)LOGO
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 No use
Bit6 Fjp_logv_plus up down
Bit5 Fjp_logo_size middle large
Bit4 Fjp_logo_tvon no use logo display while switching on
TV set
Bit3 Fjp_logo_nosignal no use logo display while no signal
LOGO
Bit2-0 Set logo color 000: black 001:blue 010: green 011: cyan 100: red 101: magenda
110: yellow 111: white
15)LOGH
adjust the horizontal display position of lo
16)LOGV
adjust the vertical display position of logo
17UVBK
Bit Function
Status
“
0
”
Status
“
1
”
Bit7-4 U BLK ADJ 0: -22mV, Input DC 8: 0mV F: 19mV, 2.75mV/dev LOGO
Bit3-0 V BLK ADJ 0: -22mV, Input DC 8: 0mV F: 19mV, 2.75mV/dev
18) ABCL
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 Fjp_rf_agc IF isn't mute while AV IF mute while AV
Bit6 Y Peak Limiter Y peak limiter on,105IRE Y peak limiter off
Bit5-4 ACL STATR POINT 0:0V 01:-0.2V 10:-0.3V 11:-1.0V ACL OFF
Bit3
Bit2 ABL START POINT 00: 0V 01: -0.2V 10: -0.30V 11: -0.4V
Bit1
ABCL
Bit0
ABL GAIN 00: -0.2V 01: -0.35V 10: -0.5V 11: -0.65V
19)DCBS