TO GET STARTED
ANTENNA CONNECTION
1. Remove the Antenna Cable from the TV set. Connect it to the “ANT.IN” terminal of
the VCP.
2. Connect one end of the RF cable to the “ANT.OUT” terminal of the VCP.
3. Connect the other end to the “ANT.IN” terminal of the TV.
REMOTE CONTROL OPERATION RANGE
IDENTIFICATION(continued)
DAEWOO Video Cassette Player
11
7m
1. Any object between the remote
control and VCP will block the path
of beam when it is being used.
Dark walls, direct sunshine or very
bright (incandescent) light will reduce
the remote control sensitivity.
2. Hold the remote control within an
angle range of about 30
o
from either
side of the remote sensor center as
shown.
3. When the remote control is vertical to
the remote Sensor, it will work within
about 23feet (7m) from the VCP.
4. Point the front of the remote control
directly at the front of the VCP.
30
o
30
o
BATTERY INSTALLATION
1. Remove the battery cover on the reverse side of the remote control.
2. Install 2 batteries (“AAA” size) into the remote control. (Carefully install batteries to
match the polarity diagrams)
3. Close the battery cover.
• It is advisable to take batteries out of the remote control when it is not in use for a
long time.
DAEWOO Video Cassette Player
12
