![Daewoo ST120W Owner'S Manual Download Page 13](http://html.mh-extra.com/html/daewoo/st120w/st120w_owners-manual_499071013.webp)
SPECIFICATIONS
General
Power requirement
Power consumption
Weight
Temperature
:
AC90-250V~, 50/60Hz
:
14 watts
:
3.8 kg
:
Operating: 5
O
C to 35
O
C
Storage: –20
O
C to 60
O
C
:
VHS standard
:
PAL/MESECAM/NTSC(3.58/4.43) color signal
:
Rotary, slant azimuth, two-head helical scan system
:
12.65 mm
:
SP:23.39 mm/sec, LP:11.70mm/sec,
NTSC(3.58):33.35mm/sec
:
180 minutes with E-180 (SP)
:
21-40 CH (adjustable) 73 3 dBuV
:
1.0Vp-p, 75 ohms unbalanced, sync. negative
(Phone Jack)
:
1.0Vp-p, 75 ohms unbalanced, sync. negative
(Phone Jack)
:
More than 43dB (with Rohde & Schwarz noise meter)
- PAL SP standard
:
More than 240 lines - PAL SP standard
:
Phone-type connector more than 47K ohms,
–8dBm, unbalanced
:
Phone-type connector more than 1K ohms,
–5.8dBm, unbalanced
:
More than 40 dB - PAL SP standard
:
Instruction Manual, Remote control, 2 Batteries,
RF cable
Tape deck section
Format
Video signal system
Scanning system
Tape width
Tape speed
Playing time
RF output
Video input
Video output
Video S/N
Resolution of picture
Audio input
Audio output level
Audio S/N
Accessories provided
* Design and specifications are subjected to change without notice.
DAEWOO Video Cassette Player
21
BEFORE CALLING SERVICE PERSONNEL
DAEWOO Video Cassette Player
22
Before calling service personnel, check the following points for a possible cause of the
trouble. A minor adjustment on your part may eliminate the trouble.
SYMPTOMS
POSSIBLE CAUSES
There is no power to the VCP.
Operation key does not function.
Tape does not run in the record mode.
Picture does not appear in the playback
mode.
Tape cannot be rewinded or fast
forwarded.
Playback picture is partially noisy.
Cassette cannot be inserted into
the VCP.
Is the power cord connected?
Is the POWER switch ON?
Has a cassette been inserted?
Has a cassette been inserted?
Is the safety tab on the cassette still
intact?
Is the TV receiver channel selector
set to an occupied channel?
Set to the RF converter channel?
Is the tape already rewound or fast
forwarded to the end?
Is the TRK + or – properly adjusted?
Is the cassette correctly inserted?
Is there a cassette already in the VCP?
k
k
k
k
k
k
k