BEFORE CALLING SERVICE PERSONNEL
21
RECORDING TV PROGRAMS
20
• Please do not turn off the power until recording is finished.
• Connect the Phone A/V jack on the another VCP set to the Phone A/V jack on
the rear or Front panel of VCP by using Phone cable.
* This is only available on some models. Check the Front of your
VIDEO to see if this connection is available.
Œ
PREPARATION (TV)
´
LOADING
Turn on the power of TV.
Press the SPEED key to select
the recording speed (SP or LP).
* Upon inserting the cassette,
the power will be on even
if the power is off.
* In NTSC record mode, select
the SP/EP mode.
ˇ
SPEED SELECTION
¨
RECORDING
ˆ
STOP
Insert a original tape to
playback VCP. Insert the blank
tape to recording VCP.
Press the PLAY key on
theplayback VCP.
Press the REC key on
the recording VCP.
The REC lndicator will
display.
To interrupt the
recording, press the
STOP key.
INDIRECT RECORDING (BY VCR WITH TUNER)
CONNECTION
OPERATION
Before calling service personnel, check the following points for a possible cause of the
trouble. A minor adjustment on your part may eliminate the trouble.
SYMPTOMS
POSSIBLE CAUSES
There is no power to the VCP.
Operation key does not function.
Tape does not run in the record mode.
Picture does not appear in the
playback mode.
Tape cannot be rewinded or fast
forwarded.
Playback picture is partially noisy.
Cassette cannot be inserted into
the VCP.
Sometimes the color of the playback in
the Auto System mode is not perfect
according to the quality of the recorded
tape.
Is the power cord connected?
Is the POWER switch ON?
Has a cassette been inserted?
Has a cassette been inserted?
Is the safety tab on the cassette still
intact?
Is the TV receiver channel selector
set to an occupied channel?
Set to the RF converter channel?
Is the tape already rewound or fast
forwarded to the end?
Is the TRK + or – properly adjusted?
Is the cassette correctly inserted?
Is there a cassette already in the VCP?
In this case, please turn System Auto
mode to Manual mode. And please select
the current exact tape system.
➟
➟
➟
➟
➟
➟
➟
➟
