RECORDING TV PROGRAMS
19
VIDEO SYSTEM
18
RECORDING / PLAYBACK VIDEO SYSTEM
• RECORDING
This VCP is possible to record not only PAL signal, but NTSC.
In Case of Auto Mode, This VCP select the system automatically
according to the input signal (PAL or NTSC) in the record mode.
* The OSD will be display according to lnput signal.
(PAL
➝
AUTO:PAL)
If video signal is different input signal from record signal in the record mode.
The picture will be no color in the play mode.
ONE TOUCH TIMER RECORDING(OTR)
• PLAYBACK
This VCP is possible to playback not only PAL tape, but NTSC tape.
In case of Auto Mode, This VCP select the system automatically according
to the inserted tape(PAL or NTSC).
* The OSD will be display according to the tape
(PAL TAPE
➝
AUTO:PAL).
When inserting the PAL tape, it will playback the PAL signal.
When inserting the NTSC tape, it will playback the NTSC signal on PAL TV.
(If you have NTSC TV, the picture will be black and white then you can take
color picture by pressing PAL/NTSC key on the remote control.)
If you want to playback the NTSC tape on NTSC TV, connect the NTSC TV to
this VCP with the line.
INPUT SIGNAL
PAL
SECAM
NTSC
RECORD SIGNAL
PAL
MESECAM
NTSC
One touch timer records a program for a preset recording time (30 minutes to 8
hours).
1.
Press REC to begin recording.
2.
Continue to press REC to increase the time length of the recording.
Press REC
To record
One time
normal(no recording time limit)
eight time
5 hours
two times
30 mins.
nine times
6 hours
thress times
1 hour
ten times
7 hours
four times
1 hour 30 mins.
eleven times
8 hours
five times
2 hours
twelve times
Normal
six times
3 hours
(no recording
seven times
4 hours
time limit)
3. To stop the recording in progress, press and hold STOP approximately
3 seconds.
Œ
PREPARATION (TV)
´
LOADING
Turn on the TV and select the
desired CH Number to record.
Insert a blank cassette tape gently.
Press the SPEED key to select
the recording speed (SP or LP).
To finish the recording,
press the STOP key.
Press the REC key.
Recording will start.
The REC lndicator will
display.
* Upon inserting the cassette,
the power will be on even
if the power is off.
* In NTSC record mode, select
the SP/EP mode.
• You can record only the same program which you are watching as follows the above
steps.
• You can record the TV programs only by the TV having the Phone A/V jacks.
• Please do not turn off the power until recording is finished.
Since this VCP has no its own TUNER, this has no function to receive TV
broadcasting signals.
To record TV programs, please use the another TV or VCP having the function to
receive TV broadcasting signals with own TUNER.
• Connect the phone A/V jack on the TV set to the Phone A/V jack on the rear or
Front panel of VCP by using phone cable.
* This is only available on some models. Check the Front of your
VIDEO to see if this connection is available.
ˇ
SPEED SELECTION
¨
RECORDING
ˆ
STOP
DIRECT RECORDING (BY TV)
CONNECTION
OPERATION
