10
Emerald 1.7L 3kw Pyramid Kettle
Model No. SDA2285
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Troubleshooting Guide
Problem
Possible Cause
Possible Fix
Kettle not boiling
On Off Switch is not
pressed down.
Press the On Off Switch (7) down.
Plug not inserted into the
mains socket and/or not
switched on.
Ensure the mains plug is plugged
into the mains socket and the socket
is switched on.
Kettle not seated on the
base correctly.
Ensure the Kettle is seated correctly
on the base (8).
Fuse blown in plug.
Check fuse by substitution.
Kettle switches off
before boiling.
Not enough water in the
Kettle.
Ensure the Kettle is filled with
sufficient water and the water level
is above the ‘MIN’ mark on the
Water Gauge (6).
Kettle requires descaling.
Follow ‘Descaling your Emerald
Kettle’ above.
Kettle boils over.
Kettle is overfilled.
Ensure that the Kettle is not filled
above the ‘MAX’ mark on the Water
Gauge (6).
Non-Wireable Mains Plug
If your appliance is supplied with a non-wireable plug fitted to the mains lead
and should the fuse need replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating). If in doubt, consult a qualified
electrician who will be pleased to do this for you. If you need to remove the plug
– DISCONNECT FROM THE MAINS – and then cut it off the mains lead and
immediately dispose of it safely. Never attempt to reuse the plug or insert it into
a socket outlet as there is a danger of electric shock.
Technical Data
Model Number
SDA2285
Rated Voltage
220-240V AC ~ 50/60Hz
Rated Power
2500 - 3000W
Protection Class
I (This appliance must be Earthed)
Capacity
1.7 Litre
