8
750W Food Processor
Model No. SDA2100
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Fitting the Processor Bowl & Attachments
Note: All attachments must be securely attached to the blade adaptor.
WARNING! The Blades are sharp so great care should be taken, always
handle blades by the central plastic section.
•
Place the
Blade Adaptor
(C) onto the
Drive Shaft
(9). See
Fig 1
below.
•
Grating and slicing blade
- Use to grate or slice cheese, vegetables, fruit for
example. Insert either the
Grating Blade
(B) or the
Slicing Blade
(D) into the
Blade Holder
(E). Fit the
Blade Holder
(E) onto the top of the
Blade Adaptor
(C). The
Blade Holder
(E) is secured in place when the lid is locked into place.
See
Fig 2
below.
•
Chopper blade
- Use to chop meat, nuts, vegetables, bread crumbs, puree
foods and so on. Place the
Chopper Blade
(F) onto the
Blade Adaptor
(C) and
push down until the blade is securely in place at the base of the
Blade Adaptor
(C). See
Fig 3
below.
Using Your Food Processor
Grating and slicing blade
1.
Carefully insert the required blade into the blade holder and fit the
Blade
Holder
(E) as detailed in
Fig 1
and
Fig 2
above.
WARNING!
The Blades are sharp so great care should be taken.
2.
Place the
Lid
(6) onto the
Processing Bowl
(5) and insert the
Pusher
(8), turn
clockwise until its locks into place.
3.
Put the
Processing Bowl
(5) onto the
Housing Unit
(10), and turn clockwise
until it clicks into place.
4.
Connect the mains plug to the power socket and switch the socket on.
5.
Turn the
Control Dial
(12) to choose a processing speed.
6.
Feed the ingredients to be grated or sliced down the
Funnel
(7) using the
Pusher
(8).
IMPORTANT: Always use the pusher when feeding food into the funnel, never
push with your fingers.
7.
When processing is complete, turn the
Control Dial
(12) to ‘0’
.
8.
Hold the
Housing Unit
(10) and grasp the bowl handle, turn anti-clockwise and
lift to release it.
�
Fig 1
Fig 2
Fig 3
9
C
C
C
F
E