Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead
must be connected as shown below. The wires in the mains lead fitted
to this appliance are coloured in accordance with the following code:
Brown wire = Live (L)
Blue wire = Neutral (N)
Green & Yellow = Earth (E)
•
The Blue wire must be connected to the terminal marked N or
coloured Black.
•
The Brown wire must be connected to the terminal marked L or
coloured Red.
•
The Green and Yellow wire must be connected to the terminal
marked E or coloured Green.
•
Check that there are no cut or stray strands of wire inside the plug.
•
Use a 3 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
•
If you are in any way unsure which plug or fuse to use, always refer
to a qualified electrician.
•
After replacing or changing a fuse on a moulded plug, the cover
must be refitted to the plug; the appliance must not be used without
a fuse cover.
WARNING: Do not wrap the cord around the Buffet Server for
storage.
Ensure the outer sheath of the
mains lead is securely held by the
cable clamp
Connect
Green &
Yellow to
Earth (E
)
Connect
Brown to
Live (L)
Connect
Blue to
Neutral
(N)
Summary of Contents for SDA1199
Page 1: ...Buffet Server...