8
Health Grill & Air Fryer
Model No. SDA 2479
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Temperature Settings
Using the left/right arrows of the Temperature Settings (17) to manually adjust the
cooking temperature in any of the pre-set cooking functions, Left arrow will
decrease the temperature and the Right arrow will increase the temperature in
increments of
5°C accordingly
dependent on the function mode. Press and hold the
left/right arrows down for more than 2 seconds to decrease/increase the
temperature in increments of 10
°C accordingly
dependent on the function mode.
When using the ‘Grill’ function mode there are 4 temperature pre-sets (Low, Med,
High, Max) pressing the left/right arrows will cycle through the temperature pre-
sets.
Start/Stop Button
After selecting the desired temperature and time for your chosen recipe or
following the pre-set cooking function, press the Start/Stop Button (15) to begin
the cooking process. During the cooking process pressing the Start/Stop Button
(15) will pause the Health Grill & Air Fryer, the LED Display (12) will show “----“.
Press the Start/Stop Button (15) to commence cooking. To change function during
either preheat or cooking process, press the Start/Stop Button (15) and then
select the correct function from the
Pre-Set Cooking Functions (16) below.
Standby Mode
The Health Grill & Air Fryer will automatically go into ‘Standby Mode’ after a
period of inactivity, if no function is selected or if not partway through
preheat/cooking process for a period of 1 minute approximately. The Health Grill
& Air Fryer will also automatically go into ‘Standby Mode’ after a period of
inactivity, or if no interaction is made with the control panel for a period of 5
minutes approximately. To wake the Health Grill & Air Fryer at any point simply
press any button or function on the Control Panel (5).
To adjust the LED Display (12) to display
°C or °F, whilst in ‘Standby Mode’
press both the right arrow of the
Temperature Settings (17) and the ‘Broil’
function from the
Pre-Set Cooking Functions (16) simultaneously.
LED Display
(12) will show either “F” or “C”, to confirm continue to press and hold for
approximately 3 seconds.
During the preheat and cooking process, the temperature can be adjusted in
the same way as per the above.
