Setup
61
AUDIO Setup
■
Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
Select a digital output.
Set output conditions to coaxial or optical terminal.
You can set following three(3)
values of digital output;
• BITSTREAM: The same signal as audio signal
recorded in disc goes to digital audio output
terminal.
• PCM: Decoded audio signal goes to digital
output terminal.
• OFF: Not any output goes to digital audio output
terminal.
2
Select Dual Mono.
Dual Mono means 2 individual mono channels.
Dual Mono is mainly used to apply 2
different languages to one program. This function
is similar to multichannel sound
function supported in TV or VCR. 2 mono channels
can be combined into total 4 values;
Stereo, L- Mono, R- Mono and Mixed Mono.
3
A user may select audio menu according to a user’s speaker set.
While DISC STOP or Resume STOP, press [SETUP/ENTER] button.
1
• Stereo: outputs left channel and right channel to left speaker and right speaker
respectively.
• L- Mono: outputs left channel to left speaker and right speaker.
• R-Mono: outputs right channel to left speaker and right speaker.
• Mixed Mono: mixes 2 mono channels and outputs the mixed channel to left
and right speaker at the same time.
Move
Select
Exit : Setup/Return
Language
Video
Audio
Others
Digital Out
Bitstream
Dual Mono
Stereo
Dynamic Range Off
Bitstream
PCM
Off
Move
Select
Exit : Setup/Return
Language
Video
Audio
Others
Digital Out
Bitstream
Dual Mono
Stereo
Dynamic Range Off
Stereo
L-Mono
R-Mono
Mixed Mono
DVD-Video(PAL) 02.3.15 5:45 PM ˘
`
61
