Basic
Operation
25
■
Press [VCR] button on the remote control to change into VCR Mode and follow the
procedure below.
Call the player’s "MAIN SETUP",
choose "VCR SETUP", then "CLOCK SET".
1
Move to the position you want to change and type
in the new values.
Wait a few seconds after typing a one-digit number.
2
Store with [OK] button and exit with [SETUP]
button.
CLOCK SET
0-9:SETUP (HOUR)
</>:CORRECT SETUP:END
TIME - - : - -
DATE - - / - - /- - - -
CLOCK SET
0-9:SETUP (HOUR)
</>:CORRECT
OK:CONFIRM SETUP:END
TIME 06:05
DATE 10/03/2002(SUN)
Setting time and date
Call the player’s "MAIN SETUP".
1
Choose “VCR SETUP”.
And press the [OK] button.
2
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press
[OK] button to confirm.
Then OSD characters are not displayed in the
normal picture.
3
OSD(On Screen Display) ON & OFF
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to OFF mode.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
Setting time and date / OSD ON & OFF
DVD-Video(PAL) 02.3.15 5:44 PM ˘
`
25
