8
7
THE FILTER
The RCC-240Y cyclone vacuum cleaner functions without a dust bag. The cyclone technology
directs the dusty intake air into the dust receiver tank using air turbulence.
The washable long-life filter (Filter) in the dust receiver tank and an exhaust air filter combine to
ensure that the air is clean before it is expelled.
Attention:
The device must only be used with the filter and exhaust air filter in place.
Emptying the dust receiver tank:
The dust receiver tank is transparent, which means that you are always able to see how full it is.
You should always empty the dust receiver tank by the time its contents reach the MAX mark.
Always unplug the appliance before emptying the dust receiver tank!
You can now remove both the tank and the cleaning system from their anchored position using
the carry handle located on the dust receiver tank. Now simply carry the dust receiver tank to the
dustbin.
Hold the dust receiver tank over your dustbin and push the interlock device back.
This action will open the bottom of the dust receiver tank, which will release its contents into the
bin.
Note if the dust receiver tank is very full, it is recommended that a bag be pulled over the tank
so that the tank can be emptied into the bag first. This avoids excessive dust being released.
Once the tank is empty it is recommended that the Filter be cleaned if necessary.
■
Carefully turn the filter in a anti-clock direction, until it disengages. Now remove the Filter.
■
Clean the Filter thoroughly. Never clean the Filter using soap or any other cleaning fluid.
This would destroy the filter!
■
If the Filter is heavily soiled, and this is leading to a reduction in suction power, it is
recommended that the filter be replaced with a new one.
Once cleaning is complete, replace the filter by simply reversing the process outlined above.
■
Clean and change the HEFA filter in time. Or it will reduce the suction power, the air can't
flow out will cause high temperature, which eventually effects the life of product.
■
Place the Filter back in the dust receiver tank and turn it carefully in a clockwise direction,
until it locks in place.
Now place the reassembled dust receiver tank back in the RCC-240Y cyclone vacuum
cleaner, ensuring that it clicks into place. Your RCC-240Y cyclone cleaner is now ready for
use.
