Daewoo Novus F3CBF, Manual

Page: 138 / 251

5-131 MISCELLANEOUS CONTROLS AND OPTIONS
(3) How to change ranges(ZF 16S-151 T/M)
a. As ZF transmission is of synchro mesh
change gear type, avoid changing gears
forcibly.
b. When changing ranges in the neutral sec-
tion, lightly tap to right or left with the palm
for gear changing operation.
c. Namely, when changing gears from the
fourth to the fifth, draw back the gearshift
lever(to the neutral position between 3rd and
4th gears), then lightly tap to right with the
palm. And then, lightly push forward the
gearshift lever which has been in the neu-
tral position between 5th and 6th gears to
change to the 5th gear.
Note
You may feel a slight resistance when changing
gears for the first time. It indicates that the syn-
chro meshes are being engaged synchronously. At
this time, do not apply unnecessary force to
change gears.
MTF0311
(4) How to change ranges(ZF 16S-221 T/M)
a. In low range(1st~4th gears), change ranges
in the same manner as for typical transmis-
sion with the range change switch toggled
down.
b. In the 4th position, do not move the gear-
shift lever but toggle up the range change
switch first.
c. Depress the clutch pedal and move the gear-
shift lever to the 1st position via the neutral
position, and the 5th gear is actuated, be-
Splitter
select valve
Range change
switch
cause the range gear in the transmission is
changed to high range automatically when
the gearshift lever passes the neutral posi-
tion.
The gearshift lever stays on the neutral po-
sition while switching low range from/to high
range.
Caution
MTF0302
When attempting to operate the gearshift lever to
change to high gear, stop it for a moment in the
neutral position and then change to higher posi-
tion.
https://www.truck-manuals.net/