Daewoo MINI DWC-M25CW User Manual Download Page 29

|

 

 

29  

|  

 

Troubleshooting ..................................................................................41
Before Contacting Customer Service ................................................42
Specifications & Wiring Diagram .......................................................44

[1] This odor may be caused by a buildup of debris and waste detergent inside the drain. 

Remember to clean the drain regularly.

[2] Refer to error codes E5, E6, E7, and E8 and then contact your retailer or the service 

center.

[3] Check to see if the water valve is open.

[1] There is a strange odor coming 

from the drum.

[2] The washer suddenly stops while 

washing is in progress.

[3] The drum will not fill with water.

[4] Could you have added too much detergent? If there is an excessive amount of suds, the 

washer will automatically drain itself even during a wash.

[5] If the laundry load is not evenly distributed inside the drum, the washer will fill itself with 

water to spread the load out and then drain the water back out.

[6] If the water pressure is too low, it takes longer for the drum to fill with water and 

consequently longer for the washing to complete.

[4] The water drains in the middle of 

a wash.

[5] The drum fills with water during 

the spin cycle.

[6] It takes a long time to complete 

a wash.

[7] Because drum washers use gravity to wash clothes, towels washed in one may come 

out stiff. 

If you want your towels soft, please use a fabric softener.

[8] Make sure the power cord is securely connected to the product.

[9] The remaining time goes up if the laundry load is distributed unevenly inside the drum.

[7] Towels come out stiff.

[8] The washer makes a strange 

noise during the spin cycle.

[9] The remaining time suddenly 

goes up.

[10] The washer fills the drum with cold water and heats it to the configured temperature. 

In winter, the remaining time may not change until the water heated to the configured 

temperature.

[11] The noise is caused by the electronic braking system and is not a malfunction.

[10] The remaining time doesn't 

change.

[11] There is a weird noise at the end 

of the spin cycle.

[12] One of the traits of a drum washer is its ability to do laundry using only a small amount 

of water. 

You may not able to see the water level, but this is not a malfunction. 

Because drum washers soak items in water and tumble them into the air for washing 

and rinsing, they do not require a lot of water.

[12] The drum doesn't seem to be 

filling with enough water during 

the wash or rinse cycle. (Low-

water level)

[13] The washer monitors the amount of water inside the drum and the status of the laundry 

load and adds extra water into the drum when necessary. Possible causes are as 

follows: 

- Additional items have been added to the load. 

- The water level dropped below the threshold and needed to be replenished.

[13] The drum fills with water again 

during the wash or rinse cycle.

[14] If an excessive amount of detergent has been used or there is a problem with the 

drainage hose, the water might not drain properly from the drum. In this case, the drum 

will remain stationary or spin at a slow rate until the water has been fully drained and 

then begin spinning at its normal rate.

[14] A long time has passed since the 

spin cycle started, but the drum 

hasn't moved or is spinning at a 

slow rate.

[15] The noises you hear are the washer using water to cool and dehumidify the 

environment inside the drum. The ventilation fan is also turned on and makes noise 

during the dry cycle.

[16] Is the cold-water tap open? The washer uses water to cool and dehumidify and will not 

be able to dry the items inside if the tap is closed. Could your laundry load be too big? 

Could you have connected the hot-water hose to the cold faucet?

[15] I hear water flowing and a 

whirring noise during the dry 

cycle.

[16] Clothes don't feel completely 

dry after going through the dry 

cycle.

Symptom

Cause

■ 

It's sometimes easy to mistaken an easily remediable issue for a malfunction.

■ 

If you are certain the product is malfunctioning, contact your retailer or the service center.

Troubleshooting

미니_사용자매뉴얼_DWC-M25CW_영어버젼_호주향.indd   29

2017-11-13   오후 2:23:04

Summary of Contents for MINI DWC-M25CW
































Reviews: