51
- Organize the inlet and drain hoses using molding
and hose guide.
※ Wipe and clean the attachment area with a dry patch
and attach the molding and hose guide tightly.
15. Organize the inlet and drain hoses and power cord
- Connect the 4 upper and lower bolts after
mounting the body.
※ Check if there is any space on either side.
16. Mount the Body
The washing machine is recommended to be installed by a professional service engineer.
-
Follow the table below when drilling the tiles with tools.
Note
Wall type
Depth of Hole
Bit diameter of
hammer drill
Bit diameter of
tile hole
Cement wall
45mm
ø 14mm
-
Concrete wall
45mm
ø 14mm
-
Tiled wall
The distance between the actuall
wall and the tile + 45mm
ø 16mm
