background image

 
 
 
 
 
 
 
 
 
 
1. Cleaning 
Unplug the LCD TV from the AC power outlet before cleaning. Do not use liquid cleaner 
or aerosol cleaner. Use a soft and damp cloth for cleaning. 
 
2. Attachments 
Do not use attachments not recommended by the LCD TV equipment manufacturer as 
they may result in the risk of fire, electronic shock or other injury. 
 
3. Water and Moisture 
Do not place the LCD TV near water, for example:- near a bathtub, kitchen sink, laundry 
tub, in a wet basement or near a swimming pool, or the like. 
 
4. Heat 
Keep the LCD TV away from heat sources such as radiator, heater, stoves and other 
heat-generating products. 
 
5. Setting 
Do not place the LCD TV on an unstable platform, for example:- a stand or table. 
Placing the LCD TV on an unstable base can cause the LCD TV to fall resulting in 
personal injuries as well as damage to the LCD TV. Use only a platform recommended 
by the manufacturer. 
 
6. Wall or Ceiling Mount 
When mounting the product on a wall or ceiling be sure to install the product using the 
designated mounting tools according to the method recommended by the manufacturer. 
 
7. Power 
The LCD TV should be operated only from the type of power source indicated on the 
marking label. If you are not sure of the type of power supplied to your home consult 
your TV dealer or local power company. 
 
8. Pixels 
The LCD TV panel is a high technology product with thousands of thin film transistors 
which give you super-fine picture detail. Occasionally a few non-active pixels may 
appear on the screen as a fixed point of blue, green or red. Please note that this does 
not affect the performance of your product and can be very difficult to even see. 
 
9. Moving 
When moving the product place your fingers of one hand in the socket on the back of 
the LCD TV and support the front of the LCD TV with the other hand. Please make sure 
no pressure is applied to the screen itself as it can and will damage the sensitive LCD 
pixels within the screen. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for L710T
























Reviews: