5
HOW TO SET THE
OVEN CONTROLS
SETTING THE CLOCK
TIME DEFROSTING
This section includes useful information
about oven operation.
1. Plug power supply cord into 220V AC
60Hz power outlet.
2. After placing the food in a suitable
container, open the oven door and put it on
the glass tray.
The glass tray and roller guide must always
be in place during cooking.
3. Shut the door. Make sure that it is firmly
closed. When the oven door is closed, the
light turns off.
The oven door can be opened at any time
during operation by pressing the door release
button on the control panel. The oven will
automatically shut off. To restart the oven,
close the door and then touch START.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven
is plugged in.
Time clock returns to the present time when
the cooking time ends.
When the STOP/CLEAR is touched during
the oven operation, the oven stops cooking
and all information retained. To erase all
information(except the present time), touch
the STOP/CLEAR once more. If the oven
door is opened during the oven operation, all
information is retained.
If the START is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
When the oven is first plugged in, the
display will flash “:0”. If the AC power ever
goes off, the display shows “:0” when the
power comes back on.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching
the numbers in sequence.
4. Touch CLOCK pad.
<The display stops blinking, and the
colon starts blinking. If you selected 12
hour clock system, this digital clock
allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, this
digital clock allows you to set from 0:00
to 23:59>
NOTE: If you attempt to enter an incorrect
time, the time will not be set and it will
return to previous status. Touch the CLOCK
pad and re-enter the time.
When DEFROST is selected, the automatic
cycle divides the defrosting time into
periods of alternating defrost and stand
times by cycling on and off.
1. Touch DEF. pad.
<The DEFROST indicator lights and “:0”
is displayed>
OPERATION PROCEDURE
