DISASSEMBLY AND ASSEMBLY
1) R em ove the screw which secure the control panel, push up tw o snap fits and draw forw ard the control panel assem bly.
2) R em ove the door open lever from the control panel.
3) R em ove tw o screw s w hich secure the tim er assem bly.
4) R em ove the tim er assem bly.
5) P ull out the tim er knob from the tim er.
6) P ull out the tim er coupler from the tim er.
7) R em ove the screw which secure the V.P.C coupler.
8) P ull out the V.P.C coupler, V.P.C knob and flat spring from the control panel.
9) R em ove the door open button and button spring from the control panel.
10) R everse the above steps for reassem bly.
6. To rem ove high voltage capacitor
1) Rem ove a screw which secure the grounding ring term inal
of the H.V.diode and the capacitor holder.
2) Rem ove the H.V. diode from the capacitor holder.
3) Reverse the above steps for reassem bly.
High voltage circuit wiring
7. To remove magnetron.
1) Rem ove a screw which secure the m agnetron.
2) Rem ove the m agnetron.
3) Reverse the above steps for reassem bly.
NOTE
N ever install the m agnetron w ithout the m etallic gasket plate w hich is packed w ith each m agnetron to prevent
m icrow ave leakage. W henever repair w ork is carried out on m agnetron, check the m icrow ave leakage. It shall
not exceed 4m W /cm
2
for a fully assem bled oven with door norm ally closed.
