Daewoo KOR-616T2S, Service Manual

Page: 8 / 56

7
Tips: • Be sure to read the cookbook's introduction before operating the oven.
• Also remember to read this operating instruction for proper safety information and instruction bfore using
the oven.
• See the cookbook for specific recipes.
• Prior to setting the controls, place one cup of water in the oven, in a heat-proof glass measuring cup, for
testing purposes.
• When setting the controls, everytime a button is pressed, a beep can be heard.
• If you don't take off the food after end cooking, buzzer will sound as 1 minute.
CONTROLS
CLOCK
NOTE
: • When the oven is plugged in, “0:00”appears in the display window.
• The two dots between the hour and minute are the clock indicator lights. They will start
to flash on and off.
• The time of day will be displayed at all times, except when the oven is operating.
• In the oven of a power failure or if the oven is unplugged, the clock will have to be reset
for the proper time. Once power is restored or oven is plugged in, the display will show
“0:00”.
• To reset the time of day, repeat the steps given below.
• To check the time of day while the oven is poerating, press the CLOCk button, then the
time will be displayed for 3 seconds.
• When you turn DIAL KNOB, minutes are increased by to turn right and hours are
increased as to turn left.
SETTING THE CONTROL
1. Press CLOCK button.
If you push the CLOCK
button once again, you can
select 12 hour clock
system.
Then guide lamp will starts
blinking.
This example is 24 hour clock
system.
NOTE
: This oven is mul-
tiple clock system.
2. Turn left the DIAL KNOB for
hour you want.
NOTE
:
• If you selected 12 hour clock
system, this digital clock allows
you to set from 1:00 to 12:59.
• If you selected 24 hour clock
system, this digital clock allows
you to set from 0:00 to 23:59.
• The colon will stop blinking.
3. Turn right the DIAL KNOB for
minute you want.
NOTE
:
If you are not setting current time for 3 seconds, display return to old time.