27
DISASSEMBLY AND ASSEMBLY
3. To remove door parts.
1. To remove cabinet.
Remove three screws (F02) on cabinet back.
2. To remove door assembly.
1) Remove two screws (F40) which secure the
top hinge stopper(F37).
2) Remove the door assembly (A00) from the top
plate of cavity.
3) Reverse the above for reassembly.
NOTE : After replacing the door perform a
check of correct alignment with the
hinge and cavity front face.
Summary of Contents for KOR-612L0S
