13
DO THIS...
THIS HAPPENS...
5. Touch the power level pad for
the power level you want
among
and
in the second stage.
LOW
M-LOW
MED
M-HIGH
HIGH
The STAGE2 indicator lights and
“P-80” is displayed.
The display will show want you
touched.
6. Touch the number pads for the
cooking time you want in the
second stage.
The display will show the numbers
you pressed in the order you
touched.
This example shows 4 minutes 20
seconds at power level M-High.
7. Touch START pad.
When you touch START pad, the WEIGHT DEFROST, STAGE1 and
STAGE2 indicators come on to confirm the power levels selected. The
WEIGHT DEFROST indicator starts blinking to show you that the oven is
in WEIGHT DEFROST mode. The display counts down the time remain-
ing in WEIGHT DEFROST mode. Turn over, break a part and redistribute
at a beep.
At the end of WEIGHT DEFROST mode, the oven will beep and start
stage one. The WEIGHT DEFROST indicator goes off and the STAGE1
indicator starts blinking. The display counts down the time remaining in
stage one.
At the end of stage one, the oven will beep and start stage two. The
STAGE1 indicator goes off and the STAGE2 indicator starts blinking.
The display counts down the time remaining in stage two when stage two
ends, you will hear 3 beeps.
START
4
2
0
M-HIGH
Summary of Contents for KOR-612L0S
